How to set Energy Saver Mode In a Bevi Standup 2.0

Energy Saver Mode for the Standup 2.0 reduces energy consumption by disabling Chilled, Sparkling, and Hot water dispensing during scheduled hours, while Ambient filtered water and flavors remain available at all times. When Energy Saver Mode is active, users are notified onscreen and can choose to pour an ambient drink, or temporarily deactivate the mode for the rest of the day.

This feature helps conserve energy during periods of low demand, such as overnight or on weekends. Technicians can configure Energy Saver Mode during installation, and can adjust the schedule at any time using the onscreen Service Panel or remotely via The Well.

In this Article (click to jump):

• What Happens During Energy Saver Mode
  
  • Timeline of the Energy Saver Sequence
• How to Set Up or Edit Energy Saver Mode
• Available Energy Saver Options
  • Weekday Schedule (M-F)
  • Weekend Schedule (Sa-Su) NEW
  • Disable Energy Saver
• Editing Energy Saver Mode on The Well

What Happens During Energy Saver Mode

When Energy Saver Mode is active, the machine displays a screen indicating it is saving energy (shown above). The screen dims, and the nozzle LEDs pulse blue at a lower brightness. Chilled, Sparkling, and Hot water dispense options are disabled and greyed out. Ambient filtered water and flavors remain available at all times.

Users can:

• Press the “Pour ambient” button to dispense ambient filtered water or flavored drinks.
• Press the “Deactivate today” button to temporarily disable Energy Saver Mode for the rest of the day, which turns the heater and chiller back on.

Timeline of the Energy Saver Sequence

• 3 hours before Energy Saver Mode starts: The ice bank gradually starts to be used up. Drinks remain cold.
• At the set start time: The "Saving Energy" screensaver and options appear, the screen is dimmed, and the nozzle LEDs are dimmed and pulse blue. The heater and chiller turn off.
• 1.5 hours before the set end time: The chiller turns back on.
• 30 minutes before the set end time: The heater turns back on.
• When Energy Saver Mode ends: The machine returns to normal operation with standard screensaver, full dispense options, and regular screen and nozzle LED brightness.

How to Set Up or Edit Energy Saver Mode

On Standup 2.0 machines, Energy Saver hours and options are set during the initial installation wizard, and can be changed at any other time and for existing units either onscreen (in Service Panel), or remotely by using The Well. The Energy Saver options are the same no matter how they are accessed.

Available Energy Saver Options

Weekday Schedule (M-F)

Drag the ends of the blue selector bar to set the Energy Saver start and end hours for weekdays (Monday - Friday). The selected timeframe must be a minimum of 3 hours or longer. (see image below)

Weekend Schedule (Sa-Su)

Below the weekday hours selector area, the following option is available to set weekend behavior (Saturday - Sunday):

• Option checked: Save energy all day Saturday and Sunday (default selection for new installs June 2025 onward)
• Option unchecked: Follows weekday schedule 

Disable Energy Saver Mode

Check this box to disable Energy Saver Mode completely on both weekdays and weekends. The selector bar turns gray and is unavailable. Energy saver mode will not activate.

Editing Energy Saver Mode on The Well

1. Navigate to the individual unit page for a Standup 2.0 machine.
2. Scroll down to the Unit Settings section.
   

3. Locate the Preferences box towards the middle-bottom.
   • It should be just above the Service History grid section.
     
4. Select the Edit icon under Energy Saver Hours.
    
5. Edit the Energy Saver timeframe by sliding the start and end points on the timeline. Energy Saver Mode can also be enabled or disabled using the checkbox in this window. Click "Save" to apply any changes.
   
6. You're done! A message box will appear when Energy Saver preferences are saved successfully, confirming that the new settings will take effect shortly.