Articles in this section

See more

How do I connect or reconnect the Bevi to the internet?

  • Updated

  1. Access the Service Panel and find the WiFi icon. Select ‘Change’ to enter the connections menu.  

  1. Select the appropriate connection type from the three options.

  • Connect Wirelessly: Select the appropriate network and enter the password if necessary.

  • Connect via Ethernet: The ethernet port on the Standup unit is located beneath the power button on the back of the Bevi. Simply plug the cable into the port and it should connect automatically. In Countertop models, the ethernet cable hangs from the bottom of the head unit and will thread through the 4” hole in the countertop. An extension cable can be used if it does not reach the ethernet jack.

  • Connect via OptConnect: After installing and initializing the OptConnect, enter the Serial Number on the box and press Done. For specific instructions on the installation of an OptConnect, please see Bevi OptConnect Installation Guide.

  1. Return to the Service Panel’s main page. The icon on the left of the network field should be green, with a “Connected” tag and the connection type listed.

  • If you are having issues connecting to the internet wirelessly, please check with the customer site’s IT team to ensure there is no firewall network issues.

 

If you require further assistance on this topic, please contact the support team at support@bevi.co or (866)704-2384.